Foam & foam rubber

Band saws especially for foam & foam rubber:

Bandsaws for foam & foam rubber

Foam and foam rubber is a collective term for soft structures with a foam-like appearance and structure. The material is often used as upholstery, insulation for soundproofing. With the right bandsaw you can easily create patterns, shapes or structures in your project, so you can achieve the most beautiful result in the end.

The band knife edge (slicer37)

The band knife edge is ideally suited for processing soft exotic products due to its straight cutting angle. The bandsaw is equipped with high-quality chrome steel with an edge hardness of 50 HrC. However, a slip unit is required to sharpen the blade directly while rotating. Due to the sharpening you will not only have a long-term sharp band knife, but it will also increase the service life of your bandsaw.

The band knife edge (slicer37) does not have an aggressive cutting angle. Keep in mind that the blade may pull on the material a bit more than its counterparts.

Band knife 14 tpi (slicer37)

Due to its straight cutting angle and aggressive serration without setting, the band knife 14 tpi (slicer37) is ideally suited for processing soft products. The band knife ensures you that you do not create fibers while sawing. The ribbon knife is made of high-quality chromium steel and has an edge hardness of 50 HrC.

Due to the required slip unit, which at the same time sharpens the blade during rotation, you will have razor-sharp blades at all times. In addition, it ensures your bandsaw to have a higher tool life and that will save costs long-term!

Carbon bandsaw (SAW37C)

Due to its high-quality carbon content, the Carbon Steel bandsaw is highly wear-resistant and will last a very long time. The carbon steel bandsaw is available in varying blade types and is also available in different thicknesses.The carbon steel bandsaw is suitable for a hobbyist as well as the professional end user.

The bandsaw is custom made, so you can be assured of the right blade to fit your specific project. The thickness is made no wider than 0.36 mm, this way we can precent metal fatigue and there will be no chance of hairline cracks.

You can also take our selection help tool and receive digital help in finding the right band saw.

Help me